एलपीएसडब्ल्यू400
डीएन500, 20″Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
बाहरी पाइप की सामग्रीChina Water Filling Machine, Machine3.2.1 क्लैंप के साथ वैक्यूम बेयोनेट कनेक्शन प्रकार
मॉडल
संबंध
प्रकार
आंतरिक पाइप का नाममात्र व्यास
डिजाइन दबाव
सामग्री
आंतरिक पाइप का
मानक
| Vटिप्पणी | 300 सीरीज स्टेनलेस स्टील |
| |
| डीएन15, 1/2″ | डीएन10, 3/8″ | 8 बार | अनुशंसित ≤ DN25 या 1″। या फ्लैंज और बोल्ट के साथ वैक्यूम बेयोनेट कनेक्शन प्रकार (DN10, 3/8″ से DN80, 3″ तक) या वेल्डेड कनेक्शन प्रकार VIP (DN10, 3/8″ से DN500, 20″ तक) का चयन करें। |
| एएसएमई बी31.3 | बी 304एल है, | ||
| C का मान 316 है। | No | No | डी 316 लीटर है, |
| Nominal Diameter of Inner Pipe | एचएलपीडी | बी01508 | डीएन15, 1/2″ |
| Design Pressure | बी02008 | डीएन20, 3/4″ | एचएलपीडी |
| बी02508 | आंतरिक पाइप का नाममात्र व्यास: | आंतरिक पाइप का नाममात्र व्यास: | अनुशंसित ≤ DN25 या 1″। या फ्लैंज और बोल्ट के साथ वैक्यूम बेयोनेट कनेक्शन प्रकार (DN10, 3/8″ से DN80, 3″ तक) या वेल्डेड कनेक्शन प्रकार VIP (DN10, 3/8″ से DN500, 20″ तक) का चयन करें। |
| बाहरी पाइप का नाममात्र व्यास: | एचएल क्रायोजेनिक इक्विपमेंट के एंटरप्राइज स्टैंडर्ड द्वारा अनुशंसित। इसे ग्राहक की आवश्यकतानुसार भी उत्पादित किया जा सकता है। | ||
| डिजाइन दबाव: | अनुशंसित दबाव ≤ 8 बार। या फ्लैंज और बोल्ट के साथ वैक्यूम बेयोनेट कनेक्शन प्रकार (≤16 बार) या वेल्डेड कनेक्शन प्रकार (≤64 बार) का चयन करें। | ||
| Material | उर्दू | ||
| बिजली की स्थिति: | LN2इस साइट को वैक्यूम पंपों को बिजली की आपूर्ति करनी होगी और एचएल क्रायोजेनिक इक्विपमेंट को स्थानीय बिजली की जानकारी (वोल्टेज और हर्ट्ज़) देनी होगी।23.2.2 फ्लैंज और बोल्ट के साथ वैक्यूम बेयोनेट कनेक्शन प्रकार | ||
मॉडल
संबंध
प्रकार
आंतरिक पाइप का नाममात्र व्यास
| डिजाइन दबाव | सामग्री | |
| आंतरिक पाइप का | मानक | टिप्पणी |
| नि: | डीएफ010 | 00X |
| स्थैतिक वैक्यूम इन्सुलेटेड पाइपिंग सिस्टम के लिए फ्लैंज और बोल्ट के साथ वैक्यूम बेयोनेट कनेक्शन प्रकार। | आंतरिक पाइप की सामग्री। | आंतरिक पाइप की सामग्री। |
| 300 सीरीज स्टेनलेस स्टील | आंतरिक पाइप की सामग्री। | आंतरिक पाइप की सामग्री। |
| आंतरिक पाइप की सामग्री। | आंतरिक पाइप की सामग्री। |
A का मान 304 है।
बी 304एल है,
C का मान 316 है।
डी 316 लीटर है,
E अन्य है।
एचएलपीडी
एफ015
00X
डीएन15, 1/2″
एचएलपीडी
एफ020
00X
Nominal Diameter of Inner Pipe
एचएलपीडी
डीएन25, 1″
00X
डीएन25, 1″
एचएलपीडी
Design Pressure
00X
डीएन32, 1-1/4″
एचएलपीडी
एफ040
00X
डीएन40, 1-1/2″
एचएलपीडी
एफ050
00X
डीएन50, 2″
एचएलपीडी
एफ065
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643अनुशंसित दबाव ≤ 16 बार। या वेल्डेड कनेक्शन प्रकार (≤64 बार) का चयन करें।X | यहूदी | DN10, 3/8″ | हंगेरी
| उर्दू | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643लात्वीयावासीX | DN15, 1/2″ | |||||
| +86 18090111643मेसीडोनियनX | DN20, 3/4″ | |||||
| +86 18090111643मलयालमX | DN25, 1″ |
Nominal Diameter of Inner Pipe:मराठी
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: नार्वेजियन
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
बी 304एल है,
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643डीएन20, 3/4″00X | तेलुगू | DN10, 3/8″ | यूक्रेनी | उर्दू | ASME B31.3 | 00: 00X 08 is 8bar, षोसा
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643उईघुर00X | DN15, 1/2″ | |||||
| +86 18090111643F02000X | DN20, 3/4″ | |||||
| +86 18090111643F02500X | DN25, 1″ | |||||
| +86 18090111643F03200X | DN32, 1-1/4″ | |||||
| +86 18090111643F04000X | DN40, 1-1/2″ | |||||
| +86 18090111643F05000X | DN50, 2″ | |||||
| +86 18090111643F06500X | DN65, 2-1/2″ | |||||
| +86 18090111643F08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: डीएन500, 20″
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
बाहरी पाइप की सामग्री
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643अगला:00X | चीन जल भरने की मशीन | DN10, 3/8″ | 8~64 bar | उर्दू | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643हमसे संपर्क करें00X | DN15, 1/2″ | |||||
| +86 18090111643वैक्यूम इंसुलेटेड पाइप श्रृंखला00X | DN20, 3/4″ | |||||
| +86 18090111643वैक्यूम इंसुलेटेड फेज सेपरेटर सीरीज00X | DN25, 1″ | |||||
| +86 18090111643W03200X | DN32, 1-1/4″ | |||||
| +86 18090111643W04000X | DN40, 1-1/2″ | |||||
| +86 18090111643W05000X | DN50, 2″ | |||||
| +86 18090111643W06500X | DN65, 2-1/2″ | |||||
| +86 18090111643W08000X | DN80, 3″ | |||||
| Hफ्रेंच00X | DN100, 4″ | |||||
| Hस्पैनिश00X | DN125, 5″ | |||||
| Hकोरियाई00X | DN150, 6″ | |||||
| Hयूनानी00X | DN200, 8″ | |||||
| Hडेनिश00X | DN250, 10″ | |||||
| Hचेक00X | DN300, 12″ | |||||
| Hपोलिश00X | DN350, 14″ | |||||
| Hएस्पेरांतो00X | DN400, 16″ | |||||
| Hअल्बानियन00X | DN450, 18″ | |||||
| Hआज़रबाइजानी00X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
कोर्सिकन
क्रोएशियाई
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPहवाईX | यहूदी | DN10, 3/8″ | हंगेरी | उर्दू | ASME B31.3 | X:जावानीस B is 304L, C is 316, D is 316L, E is other. |
| HLPDलात्वीयावासीX | DN15, 1/2″ | |||||
| HLPDमेसीडोनियनX | DN20, 3/4″ | |||||
| HLPDमलयालमX | DN25, 1″ |
Nominal Diameter of Inner Pipe:मराठी
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: नार्वेजियन
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
सेसोथो
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPताजिक00X | तेलुगू | DN10, 3/8″ | यूक्रेनी | उर्दू | ASME B31.3 | 00: वियतनामी षोसा
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDउईघुर00X | DN15, 1/2″ | |||||
| HLPDF02000X | DN20, 3/4″ | |||||
| HLPDF02500X | DN25, 1″ | |||||
| HLPDF03200X | DN32, 1-1/4″ | |||||
| HLPDF04000X | DN40, 1-1/2″ | |||||
| HLPDF05000X | DN50, 2″ | |||||
| HLPDF06500X | DN65, 2-1/2″ | |||||
| HLPDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤64 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Piping System | DN10, 3/8″ | 8~64 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00:Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDW01500X | DN15, 1/2″ | |||||
| HLPDW02000X | DN20, 3/4″ | |||||
| HLPDW02500X | DN25, 1″ | |||||
| HLPDW03200X | DN32, 1-1/4″ | |||||
| HLPDW04000X | DN40, 1-1/2″ | |||||
| HLPDW05000X | DN50, 2″ | |||||
| HLPDW06500X | DN65, 2-1/2″ | |||||
| HLPDW08000X | DN80, 3″ | |||||
| HLPDW10000X | DN100, 4″ | |||||
| HLPDW12500X | DN125, 5″ | |||||
| HLPDW15000X | DN150, 6″ | |||||
| HLPDW20000X | DN200, 8″ | |||||
| HLPDW25000X | DN250, 10″ | |||||
| HLPDW30000X | DN300, 12″ | |||||
| HLPDW35000X | DN350, 14″ | |||||
| HLPDW40000X | DN400, 16″ | |||||
| HLPDW45000X | DN450, 18″ | |||||
| HLPDW50000X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)We insist on the principle of development of ‘High quality, Efficiency, Sincerity and Down-to-earth working approach’ to provide you with excellent service of processing for 2019 New Style China 4.8kw Electric Beer Juice Nitrogen Tin Can Filling Sealing Line Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
2019 New Style China Water Filling Machine, Machine, We have been proud to supply our goods to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
